Techtop

FDR0054B-TC-01-F0

5 HP, 1800 RPM, 1 Phase, 208-230V, 184TC Rigid/C-Flange, TEFC

Catalog Number: FDR0054B-TC-01-F0

Specifications

Motor type Farm Duty Single Phase

HP 5

RPM 1800

Voltage 208-230

Phase 1

Frame 184TC

Mounting Rigid/C-Flange

Enclosure TEFC

Material Rolled Steel

Request a quote

Any questions or ready to order?

Technical assistance & free estimate

Electrical Data
Rated Motor Output Power	5 HP
Rated Motor Speed	1740 tr/min
Rated Motor Voltage (+/-10%)	208-230 V
Rated Motor Current	23.2-21.0 A
Phase	1
Poles	6
Locked Rotor Current @ High Voltage	134.54 A
Current Fl @ 208V	23.2
Service factor	1.15
KVA code	G
Nominal efficiency	82
Rated power factor	0.93
Cables (Qty, Size)	5 \| 12
Frequency	60 Hz
Connection	-
Start capacitor	350/330
Run capacitor	60/450
VFD DUTY (S.F. 1.0)	RATIO
Variable Torque	-
Constant Torque	-
SITE CONDITIONS
Ambient Temperature (℃)	40ºC
Meters Above Sea Level (MASL)	1000

General Data
Frame Size	184TC
Enclosure	TEFC
Mounting	Rigid/C-Flange
Number of speeds	-
Approximate weight	110 lbs.
Casing Material / Fan Cover	Rolled steel	\|	Steel
Shaft Material	1045
NEMA design	L
Degree of protection (IP)	54
Insulation class	F	\|	B
Rotation	No
Service	Continu
Conduit Box Location	F1
Feet Removable / Double Drilled	No	\|	Yes
Paintwork	7024	\|	Graphite Gray
Mechanical Data
Bearing DE Side	6206 2RS
Bearing ODE Side	6205 2RS
Grease Type	Mobil Polyrex EM
Compensation Ring (wavy washer)	NDE
Moment of Inertia (lb-ft2)	-
Sound Pressure @ 3 FT dBA	-

Features

Klixon manual reset thermal overload protectors (FDR models only)
Over 300% starting torque
1.15 Service Factor
18 Month warranty
High quality Japanese switches with beryllium coated contacts
Cold rolled steel construction with cast iron end bells and c-flange kits
Rubber sealed bearings
1045 Steel shaft
Surface finish:
- Alkyd enamel RAL7024 - Graphite Gray
- Black oxide surface treatment for increased corrosion resistance
Stainless steel nameplate
Corrosion resistant hardware

Operating parameters

Continuous (S1) duty
Ambient temperatures up to 40ºC
Installation up to 1000 MASL (3300 ft.)

Ingress protection

The standard degree of enclosure protection is IP54 (Weather Proof). Both drive end and non-drive end are fitted with v-seals. Motors include high quality molded capacitor cover gaskets. Conduit box lid and body are sealed with fitted rubber gaskets. DE/NDE end bell fitted with sintered brass one-way drain.